Product ID:THERMOFIT S-1006 ADHESIVE
MSDS Date:09/01/1988
FSC:8040
NIIN:01-127-9256
Kit Part:Y
MSDS Number: BGNCR

Emergency Phone: 415-361-3333

Info Phone: 415-361-3333

Preparer: GREGORY RAYMOND

Cage: 06090

Telephone: 415-361-4907

Cage: 06090

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:ORAL LD50(RAT) = 11.4 G/KG (EPOXY RESIN)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REPEATED OR PROLONGED CONTACT MAY
PRODUCT SKIN SENSITIZATION OR OTHER ALLERGIC RESPONSES IN
SUSCEPTIBLE INDIVIDUALS. MAY BE IRRITATING IF INGESTED, BUT IS NOT
KNOWN TO HAVE OTHER HARMFUL EFFECTS.
Explanation of Carcinogenicity:EPICHLOROHYDRIN IS A SUSPECTED HUMAN
CARCINOGEN BY IARC AND NTP, BUT ITS CONCENTRATION IS LESS THAN
0.1%.
Effects of Overexposure:IRRITATING TO EYES, SKIN, NOSE AND THROAT.
Medical Cond Aggravated by Exposure:SKIN SENSITIZATION OR ALLERGIES

First Aid:EYES: FLUSH IMMEDIATELY WITH WATER FOR AT LEAST 15 MINUTES.
SEEK MEDICAL ATTENTION. SKIN: WASH IMMEDIATELY WITH MILD SOAP AND
WATER. GET MEDICAL ATTENTION IF ALLERGIC SYMPTOMS DEVELOP.
INGESTION: DO N OT INDUCE VOMITING. DILUTE WITH WATER OR MILK. SEEK
MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR. SEEK MEDICAL
ADVICE, AS APPROPRIATE.

Flash Point:480F,249C
Extinguishing Media:CARBON DIOXIDE, WATER AND DRY CHEMICAL.
Fire Fighting Procedures:FIREMEN SHOULD WEAR SELF CONTAINED BREATHING
APPARATUS IN ENCLOSED AREAS
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY BE EVOLVED IN A FIRE.

Spill Release Procedures:ISOLATE SPILL, REMOVE WITH INERT ABSORBENT
MATERIAL, USING APPROPRIATE PRECAUTIONS TO PREVENT CONTACT OR OTHER
EXPOSURE. CLEAN UP RESIDUE WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY THE MANUFACTURER

Handling and Storage Precautions:CURING OF ADHESIVE (PARTS A&B) SHOULD
BE DONE IN A WELL-VENTILATED AREA. THE CURING PROCESS IS
EXOTHERMIC.
Other Precautions:PREVENT CONTACT WITH SKIN & EYES. WASH HANDS
THOROUGHLY AFTER USE. USE ONLY WITH ADEQUATE VENTILATION.

Respiratory Protection:NIOSH APPROVED RESPIRATOR AS REQUIRED BY THE
OPERATION/USE OF THIS MATERIAL.
Ventilation:IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE
ADEQUATE VENTILATION DURING APPLICATION.
Protective Gloves:IMPERVIOUS GLOVES ARE RECOMMENDED.
Eye Protection:SAFETY GLASSES OR GOGGLES RECOMMENDED
Other Protective Equipment:AS REQUIRED BY THE USE OR OPERATION
PERFORMED.
Work Hygienic Practices:PREVENT CONTACT WITH SKIN & EYES, WASH HANDS
THOROUGHLY AFTER USE. USE ONLY WITH ADEQUATE VENTILATION.
Supplemental Safety and Health
THIS IS PART A OF A TWO PART KIT. SEE P/N IND "B", THIS NSN, FOR
ADDITIONAL INFORMATION. KEY1:N1.

HCC:N1
Spec Gravity:>1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS, PURPLE LIQUID WITH SLIGHT ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
MAY REACT EXOTHERMICALLY (RELEASE HEAT) WITH ACIDS, BASES OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:SEE "MATERIALS TO AVOID"
Hazardous Decomposition Products:THERMAL DEGRADATION MAY INCLUDE CARBON
MONOXIDE, CARBON DIOXIDE, ACIDS, ALDEHYDES, AND NITROGEN COMPOUNDS.

Waste Disposal Methods:NORMAL METHODS BASED ON FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.